Hydro Force sprayer,

[they live]

Other than the valve not shutting off on the oldest one they all work. That thing has been sitting for at least a decade.

 

[Mikey P]

I usually replace the draw hose those crack and lose draw, the metal housing for the spring and ball bearing can come loose, that will cause you to loose draw.

Those two things are mostly my problems.

I have a hydro force from Cobbs that has lasted well over 3 years.

I've had to replace the hose to the gun once.

And my gun leaks doah!

So I use the ball valve alot.

I hate the square handled guns on some sprayers.

To much hand fatigue.

I think those are the ones Saigers uses.

They don't last any longer either.

I just got a new ( angular) gun for my 11 to go hobbyist HF...

 

[Dwain Ray]

I usually replace the draw hose those crack and lose draw, the metal housing for the spring and ball bearing can come loose, that will cause you to loose draw.

Those two things are mostly my problems.

I have a hydro force from Cobbs that has lasted well over 3 years.

I've had to replace the hose to the gun once.

And my gun leaks doah!

So I use the ball valve alot.

I hate the square handled guns on some sprayers.

To much hand fatigue.

I think those are the ones Saigers uses.

They don't last any longer either.

I hate all those plastic guns i went to the metal guns that came on the original hydroforce models when they first came out. They're made by spraying systems and last a very long time without any maintenance or problems for those of you whos business plan is to make 250k per year on a 1,500 investment, perhaps these are not for you. But anybody looking for a quality product this might be it . Wands are sold separately and come in 20,24 or 30" curved or straight they ues tee jets and the wand will also hold a ball check and unlike some of the guns and wands available this one is comfortable in your hand. I also use um on my upholstery sprayer. I prefer the 30" curved and i straightened it out a bit to fit me ergonomically

 

[Mikey P]

Amazon product
View: https://www.amazon.com/TeeJet-AA23H-250-1000-Stainless-Teflon/dp/B00IKP3OC8/ref=sr_1_3?crid=39QT1FWXT672N&dib=eyJ2IjoiMSJ9.ZWaFiFjbov2qXv5U8hgL_COslniXoLArve0lQPLz9GwkbN2TzctsE0kuSJI31np7i1Ra_GbeZ3L4ATwEuV0NIaaPstozEDfj-nh5Lv4XXB_deffIx7FlbSCcJ6tECr9NMFHy0sht_VOeP8k5U1sTH69M7o2f35YT5_onYtwEhvgmpS2ysdjgK5YRWoIsRrvqZa7O-5fcOlkMRtzPf39IlnFDGV--FEKIdDGZQeu76AFwHWPGc_PHRdBdaSQxiwrMv8rn1VhqTGoe64JmNifzrMvBzhKZuPj-cEdjCb0YEH4.PEqu13bY_dFKZXQQ7vYzQK4ljEWm7mtUQ1H5hWOSmGY&dib_tag=se&keywords=AA23H&qid=1754495745&sprefix=aa23h%2Caps%2C181&sr=8-3

 

[SamIam]

Other than the valve not shutting off on the oldest one they all work. That thing has been sitting for at least a decade.
View attachment 132047

Ball valve baby just hope it doesn't get to hot

 

[KevinD]

I always ordered mine straight from Hydroforce with the all metal Gunjet.

 

[Dwain Ray]

I always ordered mine straight from Hydroforce with the all metal Gunjet.

I do too when i order a whole new sprayer. But now that i have around 7 i just buy parts as needed

 

[Dwain Ray]

Ball valve baby just hope it doesn't get to hot

You swing that whole jug around??? My wrist and shoulder hurts just thinking about it. Tahe an old male& female quick connect. Use a punch or big ass nail and a hammer to Knock the guts outa them so there a hole straight thru mount female on the hydraforce and the male on a 3 or 4 ft hose mount your wand on the other end and quit playin around........ your welcome

 

[they live]

Ball valve baby just hope it doesn't get to hot

That was my bane days. Nothing got to hot lol.

I buy bulk ball valves and QDs. It only takes a few minutes to replace them on the job. Same for trigger valves.

I need the tax deductions anyway.